Part 2: Adding an NXT Line To A Job of NXT Machine Setting Procedures

FUJI IP 3 IP 3E XP2 QP2 IPC Type Paper Feeder W8 8x2mm side b

It is easy to add any current line to a job. This step is required with making new jobs for the NXT. When adding the line, a line that has been previously setup for transmission is used.

This makes adding lines easier and more error free, because the basic NXT data already exists and the NXT in the job will match the NXT for transmission. If the NXT lines have not been setup for transmission, then this must be done before adding an NXT line to the job is possible.

Adding the NXT line for the top side of the panel.

1. Select the [Top] tab from the job information bar.

2. Right-click in the data area for [Top] and select [Select line…] from the shortcut menu. The [Select Line] dialog box displays.

3. Select the factory for the desired line and select the desired NXT line from the list that displays and click [OK]. The dialog box closes and the machines from the selected line are added to the job.

Note: If there are no other Fuji machines in the line, then there most likely will only be one NXT machine. For further details, refer to the chapter about setting up an NXT line in the NXT Setup Manual.

When the line is added, the default machine data for each machine is also brought into the job.

Adding the NXT line for the bottom side of the panel.

1. Select [Flip Panel] from the [View] menu and then select the [Bottom] tab from the job information bar.

2. Right-click in the data area for [Bottom] and select [Select line…] from the shortcut menu. The [Select Line] dialog box displays.

3. Select the factory for the desired line and select the desired line from the list that displays and click [OK]. The dialog box closes and the machines from the selected line are added to the job.

Note: If there are no other Fuji machines in the line, then there most likely will only be one NXT machine. For further details, refer to the chapter about setting up an NXT line in the NXT Setup Manual.

When the line is added, the default machine data for each machine is also brought into the job.