Machine Control Specifications of Machine Control System on Fuji CP-842E CP-842ME High-Speed Chip Placer

Acceleration control (XY-table): In 5 levels are UHi, Hi, Mid, Low, ULow.

Controllable axes: A total of 12 axes are Cam, X, Y, Z, D1, D2, Pθ, Fθ, Rθ, NC, NZ and NY.

CPU: Intel Pentium type.

Maximum number of input sequences: 5000 sequences/PCB (this is the total number of sequences for both PCBs.

Program storage capacity: Limited only by the size of the hard disk.

Data input method (units): Fuji Flexa (X-, Y- and Z-axis: 0.01 mm / θ-axis: 0.01°.

Communication: Ethernet Lan.

Control panel: Color LCD touch panel.

Optical correction: For PCB positioning and part pick-up displacement.

Notes:

1. Pentium is a registered trademark of Intel corporation.

2. Fuji Flexa is the host system used for assembly data administration and transmission. It is necessary to install the host system on a suitable computer. The computer running the host should be provided by the user prior to taking delivery of the machine.

3. Ethernet cable (10 BASE-T cable, category 5; 100 m) should be prepared by the user prior to taking delivery of the machine.